Strong and simple
Concrete over a compacted gravel base forms a firm continuous surface.
HARDSCAPING

These are poured concrete walkways and sidewalks we built in Summit, Parsippany Troy Hills and Cedar Grove, New Jersey. Each one is broom finished for grip, with control joints cut so any cracking follows a planned line. For the materials and the building steps, see the poured concrete section on our walkway installation page.
PROJECTS IN THIS COLLECTION
Summit, Union County, New Jersey
The sidewalk is poured beside the fence and finished with a broom texture for grip. Tooled edges and control joints organize the surface.
Parsippany Troy Hills, Morris County, New Jersey
The walkway is shown at the base and mesh stage, then as a finished pour. Wood forms, wire mesh and the center joint are visible in the work sequence.
Cedar Grove, Essex County, New Jersey
The curved walkway follows the front approach with a broom finished surface and a clean edge against the surrounding ground.
HARDSCAPING
Concrete over a compacted gravel base forms a firm continuous surface.
A poured walkway has no joints between units except planned control joints.
Long straight runs and wide plain areas are often economical in concrete.
A broom finish gives grip when wet or icy.
Concrete has no joints to refill and needs simple care.
The base carries the load and drains water away.
Mesh helps hold the slab together if it cracks.
Forms set the edges, width and curve.
A light broom texture gives grip.
Rounded edges resist chipping.
Cut joints help cracks follow a planned line.
A joint lets concrete and buildings move independently.
New concrete needs time to cure before use.
These concrete walkway and sidewalk projects are in Summit, Parsippany Troy Hills and Cedar Grove, New Jersey.
Send us a photo, your town and a rough idea of the size and we will tell you what we would do.